Tianjin Jinfan Mould Co., Ltd.

中文版

English

GOLDENSAIL

Noticias De La Industria

Noticias De La Compañía

2021

How is the plate heat exchanger gasket replaced

Autor:

Plate heat exchangers have developed rapidly, have a wide range of applications, and involve a wide range of fields, which have brought a lot of help and convenience to our lives and production. But at the same time, any kind of equipment will have some failures if it is used for a long time, so how to replace the plate heat exchanger gasket? The following is a detailed introduction to this phenomenon, and I hope to help you.

　　1. Performance inspection and testing. When rust is suspected, check the wall thickness of the heat exchanger and pipes.
　　2, remove the aging plate heat exchanger gasket, because the rubber is sticky and there may be some adhesion. Therefore, a high-pressure blowing device is used to treat the chemical medium remaining on the surface of the plate heat exchanger.
　　3. Focus on checking the condition of the sealing groove and trimming if necessary.
　　4. The reassembled plate heat exchanger gasket group is clamped in a special fixture to cure the adhesive; it is heated in a holding furnace to achieve better adhesion. For non-adhesive gaskets, different devices are used to fix the gaskets in the heat sink.