Tianjin Jinfan Mould Co., Ltd.
-
Sobre nosotros
-
-
Producto
-
-
-
-
GOLDENSAIL
24
2022
-
11
Gasket installation method of gasket plate heat exchanger
Autor:
Plate heat exchanger gaskets can be divided into 3 types according to the installation method on the heat exchange plate
(1) Direct sticking type, that is, after applying sealant on the sealing gasket, stick it directly in the installation groove of the heat exchange plate.
(2) Glue nail mosaic type, that is, the assembly holes are designed on the heat exchange plate, and the rubber nails are designed on the side of the sealing gasket. After the sealing gasket is placed in the installation groove, the rubber nails are embedded in the assembly holes.
(3) Snap-fit type, that is, there are nails designed on the side of the sealing gasket, and the sealing gasket is buckled on the heat exchange plate with the nails. For the above three methods, the sticky gasket has a simple structure and is the easiest to process, but it is relatively troublesome to install and disassemble. Inlaid and snap-fit gaskets have complex structures and are troublesome to process, but they are relatively easy to install and disassemble. Plate heat exchanger gaskets are divided into symmetrical and asymmetrical shapes according to the cross-sectional shape of the product. Symmetrical shapes are generally applied to plates with diagonal flow. The upper and lower sealing surfaces are flat, symmetrical along the horizontal plane, and can be installed front and back. The asymmetric ground is a plane, and the upper sealing surface can be a plane, a curved surface, an inclined surface, etc.
Página anterior
Página anterior
Línea directa:
Correo electrónico empresarial:
Mensaje del cliente
Dirección: No. 8 Jianshe Road, baltai Industrial Park, Jinnan District, Tianjin
Tel: 86-13820961193
Buzón: aadmin@jinfanmoju.cn
Público de WeChat