Tianjin Jinfan Mould Co., Ltd.
-
Sobre nosotros
-
-
Producto
-
-
-
-
GOLDENSAIL
12
2022
-
10
What factors are related to the pressure drop of the plate heat exchanger
Autor:
The size of the pressure drop parameter of the plate heat exchanger is very important. If the medium pressure drop is too large, the medium pressure in the subsequent process will be insufficient, and a pump needs to be purchased for pressurization. If the pressure drop is too small, it means that the heat exchange area of the heat exchanger is too large. Too much, not economical.
The pressure drop of the plate heat exchanger is determined by the performance of the heat exchanger itself. For the heat exchanger, which parameters mainly determine the pressure drop?
The first is the number of pieces of the heat exchanger. The number of pieces determines the number of flow channels. The volume flow of the medium is constant. When the medium enters the heat exchanger, the more the number of flow channels, the slower the flow rate of the medium in the flow channel. , the smaller the pressure loss.
When the heat exchanger corner holes are smaller, the flow velocity through the interface is higher, resulting in higher pressure drop. Therefore, the pressure loss of the plate heat exchanger is mainly determined by the number of flow channels and the size of the interface, and the number of flow channels is determined by the number of plates. Therefore, in the selection, it is necessary to comprehensively consider the heat exchange capacity and pressure loss, so that a reasonable and economical heat exchanger can be designed.
Página anterior
Página siguiente
Página anterior
Página siguiente
Línea directa:
Correo electrónico empresarial:
Mensaje del cliente
Dirección: No. 8 Jianshe Road, baltai Industrial Park, Jinnan District, Tianjin
Tel: 86-13820961193
Buzón: aadmin@jinfanmoju.cn
Público de WeChat