Tianjin Jinfan Mould Co., Ltd.
-
Sobre nosotros
-
-
Producto
-
-
-
-
GOLDENSAIL
15
2022
-
07
How to choose thermowave plate heat exchanger when buying
Autor:
In order to ensure that you can buy a high-efficiency thermowave plate heat exchanger, you need to master certain methods and methods when choosing.
1. Skills of selection calculation:
The plate type or corrugated type should be determined according to the actual needs of the heat exchange occasion. In the case of large flow and small allowable pressure drop, the plate type with low resistance should be selected, otherwise, the plate type with large resistance should be selected. Depending on the fluid pressure and temperature, determine whether to choose a detachable type or a brazed type. When determining the plate type, it is not appropriate to choose a plate with a small veneer area, so as to avoid too many plates, a small flow rate between the plates, and a low heat transfer coefficient. This problem should be paid more attention to for larger heat exchangers.
2. Selection of process and runner:
The process refers to a group of parallel flow channels in the same flow direction of a medium in the thermowave plate heat exchanger, and the flow channel refers to the medium flow channel composed of two adjacent plates in the plate heat exchanger. In general, several flow channels are connected in parallel or in series to form different combinations of cold and hot medium channels.
Página anterior
Página siguiente
Página anterior
Página siguiente
Línea directa:
Correo electrónico empresarial:
Mensaje del cliente
Dirección: No. 8 Jianshe Road, baltai Industrial Park, Jinnan District, Tianjin
Tel: 86-13820961193
Buzón: aadmin@jinfanmoju.cn
Público de WeChat